Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > D

diag2(7)

HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

diag2 — interface for diagnostic logging and interface to processors

DESCRIPTION

diag2 is used by hardware monitors and tools within the Support Tools Manager (STM), to interact with processor hardware via Processor Dependent Code (PDC). Without diag2, support tools for processors will not be able to operate.

diag2 is also the key component for the following support features:

I/O error logging Low priority machine check (LPMC) logging Memory error logging Pro-active memory page deallocation.

Without the above, information that could help prevent a system or peripheral failure will be lost. In addition, if a failure occurs, HP will not have the tools or data to diagnose the cause of the problem in a timely manner. This may cause increased downtime and possible future failures.

AUTHOR

diag2 was developed by HP.

FILES

/stand/vmunix

/dev/diag/diag2

/dev/diag2

/dev/diag

directory containing diagnostic device files

SEE ALSO

stm(1M) from the Support Tools Manager

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.