Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > N

nkthread(5)

Tunable Kernel Parameters
HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

nkthread — limits the number of threads allowed to run simultaneously

VALUES

Failsafe

8416

Default

((nproc*2)+16) or 8416

Allowed values

200 - 250,000

nkthread must be greater than nproc + 100.

nkthread must be greater than max_thread_proc.

This may be set higher, but more will not be used.

Recommended values

Unless there are heavily threaded applications on the system, the default formula is adequate if nproc is tuned correctly.

DESCRIPTION

The nkthread tunable controls the absolute number of threads allowed on a system at any given time. Increasing it will allow more threads, and lowering it will restrict the number of threads.

It can be determined that nkthread is too low when the kthread: table is full message is seen in the message buffer. The message can be read via dmesg or syslog. This message indicates that an application was unable to create a thread. Setting nkthread too low can cause application failures due to an inability to create new threads or fork new processes.

It can be determined how many threads have been used simultaneously prior to the above message by calling pstat_dynamic and examining the psd_numkthreadsallocd. This field indicates the "high water" mark of the number of threads that have been simultaneously used.

Who Is Expected to Change This Tunable?

Anyone expecting to run large numbers of threads.

Restrictions on Changing

None. This tunable is dynamic.

When Should the Value of This Tunable Be Raised?

This value should be increased, either directly or as a result of tuning nproc, on most systems that are running many threads or processes.

What are the Side Effects of Raising the Value?

None.

When Should the Value of This Tunable Be Lowered?

The value should be lowered only to limit the number of threads on the system, or when there is memory pressure and the value of nkthread is far above the expected usage.

What are the Side Effects of Lowering the Value?

Increased risk of application failure do to the inability to create new threads or fork new processes.

What Other Tunable Values Should Be Changed at the Same Time?

None.

WARNINGS

All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of HP-UX.

Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation, some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tunable values, consult the documentation for the kernel software being installed. For information about optional kernel software that was factory installed on your system, see HP-UX Release Notes at http://docs.hp.com.

AUTHOR

nkthread was developed by HP.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.