Part II Section 1M: System Administration Commands

Table of Contents

Introduction

intro(1M) - introduction to system maintenance commands and application programs

A

accept(1M) - allow/prevent LP destination queuing requests

acct(1M) - overview of accounting and miscellaneous accounting commands

acctcms(1M) - command summary from per-process accounting records

acctcom(1M) - search and print process accounting files

acctcon(1M) - connect-time accounting

acctcon1(1M) - connect-time accounting — see acctcon(1M)

acctcon2(1M) - connect-time accounting — see acctcon(1M)

acctdisk(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctdusg(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctmerg(1M) - merge or add total accounting files

accton(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctprc(1M) - process accounting

acctprc1(1M) - process accounting — see acctprc(1M)

acctprc2(1M) - process accounting — see acctprc(1M)

acctsh(1M) - shell procedures for accounting

acctwtmp(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

arp(1M) - address resolution display and control

Asecure(1M) - control access to audio on a workstation; OBSOLETED — see asecure(1M)

asecure(1M) - control access to audio on a workstation; OBSOLETED

Aserver(1M) - start the audio server — see aserver(1M)

aserver(1M) - start the audio server

audevent(1M) - change or display profile, event, or system call audit status

audisp(1M) - display the audit information as requested by the parameters

audomon(1M) - audit overflow monitor daemon

audsys(1M) - start/halt the auditing system; set/display auditing system status information

audusr(1M) - select users to audit

authadm(1M) - non-interactive command for administrating the authorization information in the RBAC databases.

authck(1M) - check internal consistency of Authentication database

auto_parms(1M) - initial system configuration plus DHCP support command

automount(1M) - install automatic mount points

automountd(1M) - autofs mount/unmount daemon

autopush(1M) - manage system database of automatically pushed STREAMS modules

B

backup(1M) - backup or archive file system

bastille(1M) - system lockdown tool

bastille_drift(1M) - system configuration drift analyzer

bdf(1M) - report number of free disk blocks (Berkeley version)

bgpd(1M) - BGP routing daemon for IPv6

biod(1M) - NFS daemon

boot(1M) - bootstrap process

bootpd(1M) - Internet Boot Protocol server

bootpquery(1M) - send BOOTREQUEST to BOOTP server

C

cachefspack(1M) - pack files and file systems in the cache

cachefsstat(1M) - Cache File System statistics

captoinfo(1M) - convert a termcap description into a terminfo description

catman(1M) - create cat and whatis files for online manpages

cfsadmin(1M) - administer disk space used for caching file systems with the Cache File-System (CacheFS)

ch_rc(1M) - change system configuration file

chargefee(1M) - shell procedures for accounting — see acctsh(1M)

check_patches(1M) - HP-UX 11i V3 patch check utility

chnlspath(1M) - configure message catalog path

chroot(1M) - change root directory for a command

ckpacct(1M) - shell procedures for accounting — see acctsh(1M)

cleanup(1M) - HP-UX patch cleanup utility

clear_locks(1M) - clear locks held on behalf of an NFS client

closewtmp(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

clri(1M) - clear inode

clri_hfs(1M) - clear inode — see clri(1M)

clrsvc(1M) - clear x25 switched virtual circuit

cmdprivadm(1M) - noninteractive editing of a command's authorization and privilege information in the privrun database

cmpt_tune(1M) - query, enable, or disable compartmentalization feature

convert_awk(1M) - converts old sendmail.cf files to new format

convertfs(1M) - convert an HFS file system to allow long file names

convertfs_hfs(1M) - convert an HFS file system to allow long file names — see convertfs(1M)

coreadm(1M) - core file administration

cplxmodify(1M) - modify an attribute of a system complex

cpset(1M) - install object files in binary directories

crashconf(1M) - configure system crash dumps

crashutil(1M) - manipulate crash dump data

create_sysfile(1M) - create a kernel system file

cron(1M) - timed-job execution daemon

D

dcopy(1M) - copy HFS file system with compaction

dcopy_hfs(1M) - copy HFS file system with compaction — see dcopy(1M)

devnm(1M) - device name

df(1M) - report number of free file system disk blocks

df_cdfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks — see df_hfs(1M)

df_hfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks

df_nfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks — see df_hfs(1M)

dhcpclient(1M) - Client for Dynamic Host Configuration Protocol Server

dhcpdb2conf(1M) - convert DHCP client database to config file parameters

dhcptools(1M) - command line tool for DHCP elements of bootpd

dhcpv6clientd(1M) - DHCPv6 client daemon

dhcpv6d(1M) - Dynamic Host Configuration Protocol Server daemon for IPv6

dhcpv6db2conf(1M) - DHCPv6 client database converter

dig(1M) - domain information groper

diskinfo(1M) - describe characteristics of a disk device

disksecn(1M) - calculate default disk section sizes

diskusg(1M) - generate disk accounting data by user ID

dmesg(1M) - collect system diagnostic messages to form error log

dodisk(1M) - shell procedures for accounting — see acctsh(1M)

dpp(1M) - dedicated ports parser used by DDFA software

dump(1M) - incremental file system dump, local or across network

dumpfs(1M) - dump file system information

dumpfs_hfs(1M) - dump file system information — see dumpfs(1M)

E

edquota(1M) - edit disk quotas

efi_cp(1M) - copy to or from EFI file

efi_fsinit(1M) - write an EFI file system header on a device file

efi_ls(1M) - list EFI file information or contents of an EFI directory

efi_mkdir(1M) - make an EFI directory

efi_rm(1M) - remove an EFI file

efi_rmdir(1M) - remove an EFI directory

envd(1M) - system physical environment daemon

esmd(1M) - Essential Services Monitor (ESM) Daemon

evmchmgr(1M) - Event Manager channel manager

evmd(1M) - Event Manager daemon

evmlogger(1M) - Event Manager logger

evmreload(1M) - reload Event Manager configuration files

evmstart(1M) - start the Event Manager

evmstop(1M) - stop the Event Manager

exportfs(1M) - translates exportfs options to share/unshare commands

extendfs(1M) - extend a file system size (generic)

extendfs_hfs(1M) - extend HFS file system size

F

fbackup(1M) - selectively back up files

fcmsutil(1M) - Fibre Channel Mass Storage Utility Command for TACHYON TL, TACHYON XL2, FCD Driver-Based and FC/GigE Combo Fibre Channel Host Bus Adapters

fdetach(1M) - detach a STREAMS-based file descriptor from a filename

ff(1M) - list file names and statistics for a file system

ff_hfs(1M) - list file names and statistics for HFS file system

fingerd(1M) - remote user information server

fixman(1M) - fix manpages for faster viewing with man command

format(1M) - format an HP SCSI disk array LUN

frecover(1M) - selectively recover files

frupower(1M) - turn on/off or display current status of power for cells and I/O chassis

fsadm(1M) - a file system administration command

fsadm_hfs(1M) - HFS file system administration command

fsck(1M) - file system consistency check and interactive repair

fsck_cachefs(1M) - check integrity of data cached with CacheFS

fsck_hfs(1M) - HFS file system consistency check and interactive repair

fsclean(1M) - determine the shutdown status of HFS file systems

fsclean_hfs(1M) - determine the shutdown status of HFS file systems — see fsclean(1M)

fsdaemon(1M) - pass-through daemon for processing system commands

fsdb(1M) - file system debugger (generic)

fsdb_hfs(1M) - HFS file system debugger

fsirand(1M) - install random inode generation numbers

fstadm(1M) - defines and manages file system stack templates

fstyp(1M) - determine file system type

fsweb(1M) - launch the Disks and File Systems tool of HP System Management Homepage (HP SMH)

ftpd(1M) - DARPA Internet File Transfer Protocol server

fuser(1M) - list processes using a file or file structure

fwtmp(1M) - manipulate connect accounting records

G

gated(1M) - gateway routing daemon

gdc(1M) - operational user interface for gated

geocustoms(1M) - configure system language on multi-language systems

getfilexsec(1M) - display security attributes of binary executable(s)

getmemwindow(1M) - extract window IDs of user processes from /etc/services.window

getprocxsec(1M) - display security attributes of a process

getprpw(1M) - display protected password database

getrules(1M) - display compartment rules

getty(1M) - set terminal type, modes, speed, and line discipline

getx25(1M) - get x25 line

groupadd(1M) - add a new group to the system

groupdel(1M) - delete a group from the system

groupmod(1M) - modify a group on the system

grpck(1M) - password/group file checkers — see pwck(1M)

gsscred(1M) - add, remove and list gsscred table entries

gsscred_clean(1M) - remove duplicate entries from gsscred mapping table

gssd(1M) - generates and validates GSS-API tokens for kernel RPC

H

hosts_to_named(1M) - translate host table to name server file format

hotplugd(1M) - PCI I/O hotplug (attention button) events daemon

hpsmh(1M) - starts or stops the HP System Management Homepage server

hpux(1M) - HP-UX bootstrap

hpux.efi(1M) - HP-UX bootstrap for Itanium-based systems

I

identd(1M) - TCP/IP IDENT protocol server

idisk(1M) - create partitions for disks on an Integrity system

ifconfig(1M) - configure network interface parameters

inetd(1M) - Internet services daemon

inetsvcs_sec(1M) - enable/disable secure internet services

infocmp(1M) - compare or print out terminfo descriptions

init(1M) - process control initialization

insf(1M) - install special (device) files

install(1M) - install commands

intctl(1M) - manage the interrupt configuration of the system

io_redirect_dsf(1M) - redirect the persistent device special file from one device to a different device

iobind(1M) - bind a driver to a device

iofind(1M) - find and convert ASCII files containing the legacy representation of device (special file name or hardware path)

ioinit(1M) - test and maintain consistency between the kernel I/O data structures and the ioconfig files

ioscan(1M) - scan the I/O system

isisd(1M) - the Intermediate System to Intermediate System (IS-IS) routing daemon

isl(1M) - initial system loader

itemap(1M) - load an ITE (Internal Terminal Emulator) keyboard mapping.

K

kclog(1M) - manage kernel configuration log file

kcmodule(1M) - manage kernel modules and subsystems

kconfig(1M) - manage kernel configurations

kcpath(1M) - print kernel configuration pathnames

kctune(1M) - manage kernel tunable parameters

kcweb(1M) - starts the HP-UX kernel configuration tool (a Web interface)

keyenvoy(1M) - talk to keyserver

keyserv(1M) - server for storing private encryption keys

killall(1M) - kill all active processes

killsm(1M) - kill the sendmail daemon

kl(1M) - control kernel logging

krs_flush(1M) - flush kernel registry services data to disk

krsd(1M) - kernel registry services daemon

kwdb(1M) - invoke KWDB, the source level kernel debugger and crash dump analyzer

L

labelit(1M) - copy a file system with label checking — see volcopy(1M)

labelit_hfs(1M) - copy an HFS file system with label checking — see volcopy_hfs(1M)

lanadmin(1M) - local area network administration program

lanadmin_vlan(1M) - virtual LANs (VLANs)

lanscan(1M) - display LAN device configuration and status

lastlogin(1M) - shell procedures for accounting — see acctsh(1M)

ldapclientd(1M) - LDAP client daemon process

libcadmin(1M) - libc administration command

link(1M) - execute link() and unlink() system calls without error checking

linkloop(1M) - verify LAN connectivity with link-level loopback

livedump(1M) - initiates, configures, and stops Live Dump

localedef(1M) - generate a locale environment

lockd(1M) - network lock daemon

logins(1M) - display system and user login data

lpadmin(1M) - configure the LP spooling system

lpana(1M) - display LP spooler performance analysis information

lpfence(1M) - start the LP request scheduler; stop the LP request scheduler; move requests between LP destinations; define the minimum priority for printing — see lpsched(1M)

lpmove(1M) - start the LP request scheduler; stop the LP request scheduler; move requests between LP destinations; define the minimum priority for printing — see lpsched(1M)

lpsched(1M) - start the LP request scheduler; stop the LP request scheduler; move requests between LP destinations; define the minimum priority for printing

lpshut(1M) - start the LP request scheduler; stop the LP request scheduler; move requests between LP destinations; define the minimum priority for printing — see lpsched(1M)

lsdev(1M) - list device drivers in the system

lssf(1M) - list a special file

lugadmin(1M) - long user and group name enablement and display

lvchange(1M) - change LVM logical volume characteristics

lvcreate(1M) - create logical volume in LVM volume group

lvdisplay(1M) - display information about LVM logical volumes

lvextend(1M) - increase space, increase mirrors for LVM logical volume

lvlnboot(1M) - prepare LVM logical volume to be root, boot, primary swap, or dump volume

lvmchk(1M) - check if disk volume is under HP Logical Volume Manager (LVM) control

lvmerge(1M) - merge two LVM logical volumes into one logical volume

lvreduce(1M) - decrease space allocation or the number of mirror copies of logical volumes

lvremove(1M) - remove one or more logical volumes from LVM volume group

lvrmboot(1M) - remove LVM logical volume link to root, primary swap, or dump volume

lvsplit(1M) - split mirrored LVM logical volume into two logical volumes

lvsync(1M) - synchronize stale mirrors in LVM logical volumes

lwresd(1M) - lightweight resolver daemon

M

makedbm(1M) - make a Network Information System database

makemap(1M) - creates database maps for sendmail

map-mbone(1M) - Multicast Router Connection Mapper

mc(1M) - media changer manipulation utility

mk_kernel(1M) - load a kernel configuration from a system file

mkboot(1M) - install, update or remove boot programs from disk

mkfs(1M) - construct a file system (generic)

mkfs_hfs(1M) - construct an HFS file system

mklost+found(1M) - make a lost+found directory for the fsck command

mknod(1M) - create special files

mksf(1M) - make a special (device) file

modprpw(1M) - modify protected password database

monacct(1M) - shell procedures for accounting — see acctsh(1M)

mount(1M) - mount and unmount file systems

mount_cachefs(1M) - mount and unmount CacheFS file systems

mount_cdfs(1M) - mount and unmount CDFS file systems

mount_hfs(1M) - mount and unmount HFS file systems

mount_lofs(1M) - mount and unmount LOFS file systems

mount_nfs(1M) - mount and unmount remote NFS resources

mountall(1M) - mount and unmount multiple file systems

mountd(1M) - server for NFS mount requests and NFS access checks

mrinfo(1M) - Multicast Routing Configuration Information Tool

mrouted(1M) - IP multicast routing daemon

mtail(1M) - tails the mail log file

mvdir(1M) - move a directory

N

naaagt(1M) - Native Agent Adapter (NAA)

named(1M) - Internet domain name server

ncheck(1M) - generate a list of path names from inode numbers

ncheck_hfs(1M) - generate a list of path names from inode numbers for a HFS file system

ncweb(1M) - launch the Network Interfaces Configuration and Network Services Configuration tools of HP System Management Homepage (HP SMH)

ndd(1M) - network tuning

ndp(1M) - IPv6 Neighbor Discovery cache display and control

netfmt(1M) - format tracing and logging binary files

nettl(1M) - control network tracing and logging

nettladm(1M) - network tracing and logging administration manager

nettlconf(1M) - configure network tracing and logging command subsystem database

newaliases(1M) - rebuilds the database for the mail aliases file

newfs(1M) - construct a new file system

newfs_hfs(1M) - construct a new HFS file system

newkey(1M) - create a new Diffie-Hellman key pair in the publickey database

nfs4cbd(1M) - NFS Version 4 callback daemon

nfsd(1M) - NFS daemon

nfslogd(1M) - nfs logging daemon

nfsmapid(1M) - NFS user and group id mapping daemon

nfsstat(1M) - NFS statistics

ntpdate(1M) - set the date and time via NTP

ntpq(1M) - standard Network Time Protocol query program

nulladm(1M) - shell procedures for accounting — see acctsh(1M)

nwmgr(1M) - network interface management command for LAN and RDMA interfaces

nwmgr_btlan(1M) - network interface management command for btlan driver

nwmgr_intl100(1M) - network interface management command for intl100 driver

nwmgr_vlan(1M) - network interface management command for VLAN interface

O

ocd(1M) - outbound connection daemon used by DDFA software

ocdebug(1M) - outbound connection daemon debug utility used by DDFA software

olrad(1M) - command for Online Addition/Replacement/Deletion of PCI I/O cards and Online Addition of I/O chassis

opx25(1M) - execute HALGOL programs

ospf_monitor(1M) - monitor OSPF (Open Shortest Path First protocol) gateways

owners(1M) - list owners of outgoing network connections

P

parcreate(1M) - create a new partition

parmodify(1M) - modify an existing partition

parolrad(1M) - online activation of a cell from nPartition; cancel online cell operation; monitor online cell operation; reset hung cell during cell activation

parremove(1M) - remove an existing partition

parunlock(1M) - unlock stable complex profile or cancel pending changes to complex or partition configuration data

pcnfsd(1M) - PC-NFS authentication and print request server

pcserver(1M) - Basic Serial and HP AdvanceLink server

pdc(1M) - processor-dependent code (firmware)

pdweb(1M) - start the HP-UX Peripheral Device tool, part of the System Management Homepage Web interface

ping(1M) - send ICMP Echo Request packets to network host

portmap(1M) - universal addresses to RPC program number mapper — see rpcbind(1M)

power_onoff(1M) - timed, automatic system power on, and power off

pppoerd(1M) - PPPoE (Point to Point Protocol over Ethernet) relay

pppoesd(1M) - PPPoE (Point-to-Point Protocol over Ethernet) server daemon

prctmp(1M) - shell procedures for accounting — see acctsh(1M)

prdaily(1M) - shell procedures for accounting — see acctsh(1M)

privedit(1M) - let authorized users edit files that are under access control

privrun(1M) - invoke another application with privileges after performing appropriate authorization checks and optionally reauthenticating the user

prtacct(1M) - shell procedures for accounting — see acctsh(1M)

psfontpf(1M) - internationalized PostScript print filter

psmsgen(1M) - model script configuration utility for psfontpf

psrset(1M) - create and manage processor sets

pvchange(1M) - change characteristics and access path of physical volume in LVM volume group

pvck(1M) - check or repair a physical volume in LVM volume group

pvcreate(1M) - create physical volume for use in LVM volume group

pvdisplay(1M) - display information about physical volumes in LVM volume group

pvmove(1M) - move allocated physical extents from one LVM physical volume to other physical volumes

pvremove(1M) - remove LVM data structure from a physical volume

pwck(1M) - password/group file checkers

pwconv(1M) - install, update or check the /etc/shadow file

pwgr_stat(1M) - password and group hashing and caching statistics

pwgrd(1M) - password and group hashing and caching daemon

pwunconv(1M) - convert passwords from shadow to nonshadow

Q

quot(1M) - summarize file system ownership

quot_hfs(1M) - summarize ownership on an HFS file system

quotacheck(1M) - file system quota consistency checker

quotacheck_hfs(1M) - quota consistency checker for HFS file systems

quotaoff(1M) - turn HFS file system quotas on and off — see quotaon(1M)

quotaon(1M) - turn HFS file system quotas on and off

R

rad(1M) - rad features have been moved to olrad

ram_monitor(1M) - the Route Administration Manager (RAM) monitor

ramd(1M) - Route Administration Manager Daemon (RAMD) for IPv6

rarpc(1M) - Reverse Address Resolution Protocol client

rarpd(1M) - Reverse Address Resolution Protocol daemon

rbacdbchk(1M) - Verifies the syntax of the Role-Based Access Control (RBAC) database files

rc(1M) - general purpose sequencer invoked upon entering new run level

rcancel(1M) - remove requests from a remote printer spooling queue

rdc(1M) - user interface for Routing Administration Manager (RAMD)

rdpd(1M) - router discovery protocol daemon (OBSOLETE)

rdump(1M) - incremental file system dump, local or across network — see dump(1M)

reboot(1M) - reboot the system

reject(1M) - allow/prevent LP destination queuing requests — see accept(1M)

remshd(1M) - remote shell server

renice(1M) - alter priority of running processes

repquota(1M) - summarize file system quotas

restore(1M) - restore file system incrementally, local or across network

rexd(1M) - RPC-based remote execution server

rexecd(1M) - remote execution server

ripngd(1M) - RIPng routing daemon for IPv6

ripquery(1M) - query RIP gateways

rlogind(1M) - remote login server

rlp(1M) - send LP print request to a remote system

rlpdaemon(1M) - daemon for queuing, displaying, removing and altering remote spool requests and writing remote messages

rlpstat(1M) - print status of LP spooler requests on a remote system

rmboot(1M) - install, update or remove boot programs from disk — see mkboot(1M)

rmsf(1M) - remove a special (device) file

rmt(1M) - remote magnetic-tape protocol module

roleadm(1M) - noninteractive editing of role-related information in RBAC databases

route(1M) - manually manipulate the routing tables

rpc.lockd(1M) - network lock daemon — see lockd(1M)

rpc.mountd(1M) - server for NFS mount requests and NFS access checks — see mountd(1M)

rpc.nisd_resolv(1M) - DNS service daemon for NIS

rpc.pcnfsd(1M) - PC-NFS authentication and print request server — see pcnfsd(1M)

rpc.sprayd(1M) - spray server — see sprayd(1M)

rpc.statd(1M) - network status monitor — see statd(1M)

rpc.yppasswdd(1M) - daemon for modifying Network Information Service passwd database — see yppasswdd(1M)

rpc.ypupdated(1M) - server for changing NIS information — see ypupdated(1M)

rpcbind(1M) - universal addresses to RPC program number mapper

rpcinfo(1M) - report RPC information

rquotad(1M) - remote quota server

rrestore(1M) - restore file system incrementally, local or across network — see restore(1M)

rstatd(1M) - kernel statistics server

rtradvd(1M) - Router Advertisement daemon for IPv6

runacct(1M) - run daily accounting

rusersd(1M) - network username server

rwall(1M) - write to all users over a network

rwalld(1M) - network rwall server

rwhod(1M) - system status server

S

sa1(1M) - system activity report package

sa2(1M) - system activity report package — see sa1(1M)

sadc(1M) - system activity report package — see sa1(1M)

sam(1M) - HP System Administration Manager (HP SAM)

sar(1M) - system activity reporter

savecrash(1M) - save a crash dump of the operating system

scsictl(1M) - control a SCSI device

scsimgr(1M) - SCSI management and diagnostic utility

sd(1M) - display and monitor job information and create and remove jobs; invoke graphical user interface to display and monitor job information and create and remove jobs; respectively — see swjob(1M)

security_patch_check(1M) - check security-bulletin compliance state of HP-UX 11.x system or depot

secweb(1M) - invokes the HP-UX Security Attributes Configuration tool

sendmail(1M) - send mail over the Internet

service.switch(1M) - indicate lookup sources and fallback mechanism

set_parms(1M) - set system initial identity parameters: hostname, date/time, root password, and networking

setboot(1M) - display and modify boot variables in stable storage

setfilexsec(1M) - set extended security attributes on a binary file

setmemwindow(1M) - change window ID of running program or start program in particular memory window

setoncenv(1M) - NFS environment configuration command

setprivgrp(1M) - set special privileges for groups

setrules(1M) - set compartment rules

setuname(1M) - change machine information

share(1M) - make local resource available for mounting by remote systems

share_nfs(1M) - make local NFS file systems available for mounting by remote systems

shareall(1M) - share, unshare multiple resources

showmount(1M) - show all remote mounts

shutacct(1M) - shell procedures for accounting — see acctsh(1M)

shutdown(1M) - terminate all processing

sig_named(1M) - send signals to the domain name server

slpd(1M) - Service Location Protocol (SLP) Daemon

slpdc(1M) - send signals to the SLP daemon or starts slpd

slweb(1M) - start the HP-UX hardware event viewer tool (a Web interface)

smh(1M) - HP System Management Homepage (HP SMH)

smhstartconfig(1M) - configures the startup mode of the HPSMH server and of the Tomcat instance used by HPSMH

smrsh(1M) - restricted shell for sendmail

snmpd(1M) - Simple Network Management Protocol (SNMP) Process

snmpdm(1M) - Simple Network Management Protocol (SNMP) Process — see snmpd(1M)

softpower(1M) - determine if softpower hardware is installed on the system

spray(1M) - spray packets

sprayd(1M) - spray server

st(1M) - shared tape administration

startup(1M) - shell procedures for accounting — see acctsh(1M)

statd(1M) - network status monitor

strace(1M) - write STREAMS event trace messages to standard output

strchg(1M) - change or query stream configuration

strclean(1M) - remove outdated STREAMS error log files

strconf(1M) - change or query stream configuration — see strchg(1M)

strerr(1M) - receive error messages from the STREAMS log driver

strvf(1M) - STREAMS verification tool

swacl(1M) - view or modify the Access Control Lists (ACLs) which protect software products

swagent(1M) - serve local or remote SD software management tasks; daemon that invokes swagent — see swagentd(1M)

swagentd(1M) - serve local or remote SD software management tasks; daemon that invokes swagent

swapinfo(1M) - system paging space information

swapon(1M) - enable device or file system for paging

swask(1M) - ask for user response

swconfig(1M) - configure, unconfigure, or reconfigure installed software

swcopy(1M) - install and configure software products; software products for subsequent installation or distribution; respectively — see swinstall(1M)

swgettools(1M) - Utility for retrieving the SD product from new SD media in preparation for an OS update.

swinstall(1M) - install and configure software products; software products for subsequent installation or distribution; respectively

swjob(1M) - display and monitor job information and create and remove jobs; invoke graphical user interface to display and monitor job information and create and remove jobs; respectively

swlist(1M) - display information about software products

swmodify(1M) - modify software products in a target root or depot

swpackage(1M) - package software products into a target depot or tape

swreg(1M) - register or unregister depots and roots

swremove(1M) - unconfigure and remove software products

swverify(1M) - verify software products

sync(1M) - synchronize file systems

syncer(1M) - periodically sync for file system integrity

sysdef(1M) - display system definition

syslogd(1M) - log system messages

T

talkd(1M) - remote user communication server

tcpd(1M) - access control facility for internet services

telnetd(1M) - TELNET protocol server

tftpd(1M) - trivial file transfer protocol server

tic(1M) - terminfo compiler

tsm.lpadmin(1M) - add or remove a printer for use with tsm

tunefs(1M) - tune up an existing HFS file system

tunefs_hfs(1M) - tune up an existing HFS file system — see tunefs(1M)

turnacct(1M) - shell procedures for accounting — see acctsh(1M)

U

udpublickey(1M) - update the publickey database file and the NIS map

ugweb(1M) - starts the HP-UX User and Group Account Configuration tool

umount(1M) - mount and unmount file systems — see mount(1M)

umount_cachefs(1M) - mount and unmount CacheFS file systems — see mount_cachefs(1M)

umount_cdfs(1M) - mount and unmount CDFS file systems — see mount_cdfs(1M)

umount_hfs(1M) - mount and unmount HFS file systems — see mount_hfs(1M)

umount_lofs(1M) - mount and unmount LOFS file systems — see mount_lofs(1M)

umount_nfs(1M) - mount and unmount remote NFS resources — see mount_nfs(1M)

umountall(1M) - mount and unmount multiple file systems — see mountall(1M)

unlink(1M) - execute link() and unlink() system calls without error checking — see link(1M)

unshare(1M) - make local resource unavailable for mounting by remote systems

unshare_nfs(1M) - make local NFS file systems unavailable for mounting by remote systems

unshareall(1M) - share, unshare multiple resources — see shareall(1M)

untic(1M) - terminfo de-compiler

update-ux(1M) - updates the HP-UX operating system from new HP-UX media

updaters(1M) - configuration file for NIS updating

ups_mond(1M) - HP PowerTrust Uninterruptible Power System monitor daemon

useradd(1M) - add a new user login to the system

userdbck(1M) - verify or fix information in the user database, /var/adm/userdb

userdbget(1M) - display information residing in the user database, /var/adm/userdb

userdbset(1M) - modify information in the user database, /var/adm/userdb

userdel(1M) - delete a user login from the system

usermod(1M) - modify a user login on the system

userstat(1M) - check status of local user accounts

utmp2wtmp(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

utmpd(1M) - user accounting database daemon

uucheck(1M) - check the uucp directories and permissions file

uucico(1M) - transfer files for the uucp system

uuclean(1M) - uucp spool directory clean-up

uucleanup(1M) - uucp spool directory clean-up

uucpd(1M) - UUCP over TCP/IP server daemon

uugetty(1M) - set terminal type, modes, speed and line discipline

uuls(1M) - list spooled uucp transactions grouped by transaction

uusched(1M) - schedule uucp transport files

uusnap(1M) - show snapshot of the UUCP system

uusnaps(1M) - sort and embellish uusnap output

uusub(1M) - monitor uucp network

uuxqt(1M) - execute remote uucp or uux command requests

V

vgcfgbackup(1M) - create or update LVM volume group configuration backup file

vgcfgrestore(1M) - display or restore LVM volume group configuration from backup file

vgchange(1M) - set LVM volume group availability

vgchgid(1M) - modify the Volume Group ID (VGID) on a given set of physical devices

vgcreate(1M) - create LVM volume group

vgdisplay(1M) - display information about LVM volume groups

vgexport(1M) - export an LVM volume group and its associated logical volumes

vgextend(1M) - extend an LVM volume group by adding physical volumes

vgimport(1M) - import an LVM volume group onto the system

vgmodify(1M) - handle physical volume size changes and modify configuration parameters of an existing LVM volume group

vgreduce(1M) - remove physical volumes from an LVM volume group

vgremove(1M) - remove LVM volume group definition from the system

vgscan(1M) - scan physical volumes for LVM volume groups

vgsync(1M) - synchronize stale logical volume mirrors in LVM volume groups

vhardlinks(1M) - checks the consistency of compartment rules for files with multiple hardlinks

vipw(1M) - edit the password file

volcopy(1M) - copy a file system with label checking

volcopy_hfs(1M) - copy an HFS file system with label checking

vtdaemon(1M) - respond to vt requests

W

wall(1M) - write message to all users

whodo(1M) - which users are doing what

wtmpfix(1M) - manipulate connect accounting records — see fwtmp(1M)

X

xntpd(1M) - Network Time Protocol daemon

xntpdc(1M) - special NTP query program

Y

ypbind(1M) - Network Information Service (NIS) server, binder, and transfer processes — see ypserv(1M)

ypinit(1M) - build and install Network Information Service databases

ypmake(1M) - create or rebuild Network Information Service databases

yppasswdd(1M) - daemon for modifying Network Information Service passwd database

yppoll(1M) - query NIS server for information about NIS map

yppush(1M) - force propagation of Network Information Service database

ypserv(1M) - Network Information Service (NIS) server, binder, and transfer processes

ypset(1M) - bind to particular Network Information Service server

ypupdated(1M) - server for changing NIS information

ypxfr(1M) - transfer NIS database from server to local node

ypxfr_1perday(1M) - transfer NIS database from server to local node — see ypxfr(1M)

ypxfr_1perhour(1M) - transfer NIS database from server to local node — see ypxfr(1M)

ypxfr_2perday(1M) - transfer NIS database from server to local node — see ypxfr(1M)

ypxfrd(1M) - Network Information Service (NIS) server, binder, and transfer processes — see ypserv(1M)