Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference

Part VI Section 5: Miscellaneous Topics

» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

Section 5: Miscellaneous Topics

Table of Contents

Introduction
intro(5) - introduction to miscellany
A
acctresume(5) - suspend and resume accounting when available disk space reaches threshold — see acctsuspend(5)
acctsuspend(5) - suspend and resume accounting when available disk space reaches threshold
acl(5) - introduction to HFS access control lists (ACLs)
aclv(5) - introduction to JFS access control lists (ACLs)
aio(5) - POSIX asynchronous I/O facility
aio_iosize_max(5) - maximum size of any asynchronous I/O in an lio_listio(), aio_read(), or aio_write() call
aio_listio_max(5) - the maximum number of POSIX asynchronous I/O operations that can be specified in a listio() call
aio_max_ops(5) - maximum number of POSIX async I/O operations that can be queued at any time
aio_monitor_run_sec(5) - frequency of AIO thread pool monitor execution (in seconds)
aio_physmem_pct(5) - percentage of physical memory lockable for request call-back POSIX asynchronous I/O operations
aio_prio_delta_max(5) - greatest delta (slowdown factor) allowed in POSIX async IO request priorities
aio_proc_max(5) - maximum number of async I/O operations that can be queued by any process that uses aio_reap()
aio_proc_thread_pct(5) - percentage of all process threads allowed in AIO pool
aio_proc_threads(5) - maximum number of process threads allowed in AIO pool
aio_req_per_thread(5) - desirable ratio between number of pending AIO requests and servicing threads
aliases(5) - aliases file for sendmail
allocate_fs_swapmap(5) - determines when swapmap structures are allocated for filesystem swap
alwaysdump(5) - defines which classes of kernel memory pages are dumped when a kernel panic occurs
Aries(5) - emulate PA-RISC HP-UX applications on Itanium-based systems running HP-UX
ascii(5) - map of ASCII character set
Audio(5) - audio tools available through HP VUE (OBSOLETED)
audit(5) - introduction to HP-UX Auditing System
audit_memory_usage(5) - percentage of physical memory that can be used by audit subsystem
audit_track_paths(5) - enable/disable tracking of current and root directories for auditing subsystem
B
bufcache_max_pct(5) - OBSOLETED kernel tunable parameter — see dbc_max_pct(5)
bufpages(5) - OBSOLETED kernel tunable parameter — see dbc_max_pct(5)
C
chanq_hash_locks(5) - size of hashed pool of spinlocks protecting the channel queue hash tables
compartments(5) - description of HP-UX compartments
complex(5) - complex functions and macros
core_addshmem_read(5) - determines the inclusion of readable shared memory in a process core dump
core_addshmem_write(5) - determines the inclusion of read/write shared memory in process core dump
create_fastlinks(5) - configure the system to use fast symbolic links
curses(5) - definitions for screen handling and optimization functions
curses.h(5) - definitions for screen handling and optimization functions — see curses(5)
D
dbc_max_pct(5) - OBSOLETED kernel tunable parameter
dbc_min_pct(5) - OBSOLETED kernel tunable parameter — see dbc_max_pct(5)
default_disk_ir(5) - enable and disable use of device's write cache in the SCSI subsystem (OBSOLETE)
dirent(5) - format of directory streams and directory entries
diskaudit_flush_interval(5) - determine time interval (in secs) for flushing audit records
dld.sl(5) - dynamic loader
dld.so(5) - dynamic loader
dlpi_max_clones(5) - maximum number of cloned DLPI streams allowed on the system
dma32_pool_size(5) - the amount of memory to reserve for the 32-bit DMA pool
dnlc_hash_locks(5) - number of locks for the Directory Name Lookup Cache (DNLC)
dontdump(5) - defines which classes of kernel memory pages are not dumped when a kernel panic occurs
dump_compress_on(5) - selects whether the system dumps memory pages compressed or uncompressed when a kernel panic occur
dump_concurrent_on(5) - enable or disable option for system to dump memory using multiple dump units when a kernel panic occurs on Integrity systems
E
enable_idds(5) - enable intrusion detection data source
environ(5) - user environment
eqmem_limit(5) - determines the maximum amount (in MB) of equivalently mapped memory which can be allocated after boot
eqmemsize(5) - determines the minimum size (in pages) of the equivalently mapped reserve pool (OBSOLETED)
EVM(5) - event management
EvmCallback(5) - event management (EVM) callback function
EvmConnection(5) - connection to the EVM (Event Management) daemon
EvmEvent(5) - structure of an EVM event
EvmFilter(5) - EVM (Event Management) event filter
executable_stack(5) - controls whether program stacks are executable by default
expanded_node_host_names(5) - enable maximum length expansion of the system node and host names
F
fadvise(5) - structures needed when using the fadvise() function
fadvise.h(5) - structures needed when using the fadvise() function — see fadvise(5)
fcache_fb_policy(5) - policy for flush behind requests from VxFS file system
fcache_seqlimit_file(5) - percent of file cache that can be consumed by sequential accesses, per-file limit
fcache_seqlimit_system(5) - percentage of file cache that can be consumed by sequential accesses, per system-wide limit
fcntl(5) - file control options
fenv(5) - floating-point environment macros and functions
filecache_max(5) - maximum or minimum amount of physical memory used for caching file I/O data
filecache_min(5) - maximum or minimum amount of physical memory used for caching file I/O data — see filecache_max(5)
fs_async(5) - enables write calls to return before write operation is complete
fs_symlinks(5) - maximum number of symbolic links used to resolve a path name
fs_wrapper(5) - configuration and binary files used by file system administration commands
G
gssapi(5) - Generic Security Service Application Programming Interface
gvid_no_claim_dev(5) - PCI Vendor/Device ID that the gvid graphics driver will not claim
H
hdlpreg_hash_locks(5) - determines the size of the pregion spinlock pool
hfs_revra_per_disk(5) - maximum HFS file system blocks to be read in one read-ahead operation when sequentially reading backwards
hier(5) - file system hierarchy
hires_timeout_enable(5) - enable high resolution timers support
hostname(5) - host name resolution description
hosts_access(5) - format of host access control files
hosts_options(5) - host access control language extensions
I
intr_strobe_ics_pct(5) - limit for the percent of time a processor is allowed to spend in interrupt context
inttypes(5) - fixed-size integer data types
ioctl(5) - generic device control commands
ipmi_watchdog_action(5) - sets action taken if IPMI watchdog timer expires
K
kconfig(5) - introduction to kernel configuration commands
Kerberos(5) - introduction to the Kerberos system
krs(5) - kernel registry services, KRS
ksi_alloc_max(5) - system-wide limit of queued signals that can be allocated
ksi_send_max(5) - limit on number of queued signals per process
L
lang(5) - description of supported languages
langinfo(5) - language information constants
lcpu_attr(5) - dynamically enable or disable LCPU attribute of the default processor set
ldapux(5) - overview of LDAP-UX
libcrash(5) - crash dump access library
libcres(5) - subset of functions from libc
limits(5) - implementation-specific constants
livedump(5) - a feature that saves operating system state to the file system for debugging purposes.
M
man(5) - macros for formatting manpages
manuals(5) - accessing and ordering HP-UX documentation
math(5) - math functions, constants, and types
max_acct_file_size(5) - defines the maximum accounting file size
max_async_ports(5) - maximum number of asynchronous disk ports that can be open at any time
max_mem_window(5) - maximum number of group-private 32-bit shared memory configurable by users
max_thread_proc(5) - defines the maximum number of concurrent threads allowed per process.
maxdsiz(5) - maximum size (in bytes) of the data segment for any user process
maxdsiz_64bit(5) - maximum size (in bytes) of the data segment for any user process — see maxdsiz(5)
maxfiles(5) - initial (soft) maximum number of file descriptors per process
maxfiles_lim(5) - hard maximum number of file descriptors per process
maxrsessiz(5) - maximum size (in bytes) of the RSE stack for any user process on the Itanium-based platform
maxrsessiz_64bit(5) - maximum size (in bytes) of the RSE stack for any user process on the Itanium-based platform — see maxrsessiz(5)
maxssiz(5) - maximum size (in bytes) of the stack for any user process
maxssiz_64bit(5) - maximum size (in bytes) of the stack for any user process — see maxssiz(5)
maxtsiz(5) - maximum size (in bytes) of the text segment for any user process
maxtsiz_64bit(5) - maximum size (in bytes) of the text segment for any user process — see maxtsiz(5)
maxuprc(5) - limits the maximum number of concurrent user processes per user
maxvgs(5) - maximum number of LVM Volume Groups that can be created/activated on the system (OBSOLETE)
mesg(5) - enable or disable System V IPC messages at boot time (OBSOLETE)
mknod(5) - header file of macros for handling device numbers
mknod.h(5) - header file of macros for handling device numbers — see mknod(5)
mm(5) - the MM macro package for formatting documents
mman(5) - memory mapping definitions
msgmap(5) - number of entries in the System V IPC message space resource map (OBSOLETE)
msgmax(5) - maximum System V IPC message size in bytes (OBSOLETE)
msgmbs(5) - maximum number of megabytes for all System V IPC message queues
msgmnb(5) - maximum number of bytes on a single System V IPC message queue
msgmni(5) - maximum number of system-wide System V IPC message queues (IDs) allowed
msgseg(5) - number of System V IPC message segments in the system (OBSOLETE)
msgssz(5) - number of bytes in a System V IPC message segment (OBSOLETE)
msgtql(5) - maximum number of System V IPC messages in the system at any time
N
nbuf(5) - OBSOLETED kernel tunable parameter — see dbc_max_pct(5)
ncdnode(5) - maximum number of open CDFS files (system-wide)
nclist(5) - number of cblocks for pty and tty data transfers
ncsize(5) - number of Directory Name Lookup Cache (DNLC) entries
nfile(5) - maximum number of open files (system-wide)
nflocks(5) - maximum number of file locks
nfs_portmon(5) - enable/disable the NFS server's source port verification check
nfs2_max_threads(5) - control the number of kernel threads that perform asynchronous I/O for the NFS version 2 client
nfs2_nra(5) - control the number of read-ahead operations queued by the NFS version 2 client when sequentially accessing a file
nfs3_bsize(5) - control the logic block size used by NFS version 3 clients
nfs3_do_readdirplus(5) - turn on or off NFS version 3 readdirplus functionality on the NFS server
nfs3_jukebox_delay(5) - control the length of time the NFS version 3 client waits before re-transmitting a request after receiving a NFS3ERR_JUKEBOX error
nfs3_max_threads(5) - control the number of kernel threads that perform asynchronous I/O for the NFS version 3 client
nfs3_max_transfer_size(5) - control the data portion size of a NFS version 3 read, write, readdir, or readdirplus request
nfs3_max_transfer_size_cots(5) - control the data portion size of a NFS version 3 read, write, readdir, or readdirplus request over TCP
nfs3_nra(5) - control the number of read-ahead operations queued by the NFS version 3 client when sequentially accessing a file
nfs4_bsize(5) - control the logic block size used by NFS version 4 clients
nfs4_max_threads(5) - control the number of kernel threads that perform asynchronous I/O for the NFS version 4 client
nfs4_max_transfer_size(5) - control the size of the data portion of a NFS version 4 read, write, readdir, or readdirplus request
nfs4_max_transfer_size_cots(5) - control the data portion size of a NFS version 4 read, write, readdir, or readdirplus request over TCP
nfs4_nra(5) - control the number of read-ahead operations queued by the NFS version 4 client when sequentially accessing a file
nfssec(5) - overview of NFS security modes
ninode(5) - maximum number of HFS file system open inodes that can be in memory
nkthread(5) - limits the number of threads allowed to run simultaneously
nodehostnamesize(5) - size of node name and host name
nproc(5) - limits the number of processes allowed to exist simultaneously
npty(5) - maximum number of BSD pseudo terminals (ptys)
NSTREVENT(5) - maximum number of outstanding STREAMS bufcalls
nstrpty(5) - maximum number of STREAMS-based pseudo terminals (pts)
NSTRPUSH(5) - maximum number of STREAMS modules in a single stream
NSTRSCHED(5) - number of STREAMS scheduler daemons to run
nstrtel(5) - specifies the number of telnet device files the kernel can support for incoming telnet sessions
nswapdev(5) - maximum number of devices that can be enabled for swap
nswapfs(5) - maximum number of file systems that can be enabled for swap
nsysmap(5) - number of entries in a kernel dynamic memory allocation map
nsysmap64(5) - number of entries in a kernel dynamic memory allocation map — see nsysmap(5)
numa_policy(5) - physical memory allocation policy on cell-based HP-UX servers
O
orientation(5) - the orientation of a stream
P
pa_maxssiz(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on an Integrity system
pa_maxssiz_32bit(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on an Integrity system — see pa_maxssiz(5)
pa_maxssiz_64bit(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on an Integrity system — see pa_maxssiz(5)
pagezero_daemon_enabled(5) - zeroing of free memory in the background is enabled
pam_authz(5) - PAM module that provides user authorization
pam_hpsec(5) - extended authentication, account, password, and session service module for HP-UX
pam_ldap(5) - authentication, account, session, and password management PAM modules for LDAP
pam_unix(5) - authentication, account, session, and password management PAM modules for UNIX
pam_updbe(5) - User policy definition service module
partition(5) - display information about the Partition Command Line Interface
pci_eh_enable(5) - enables/disables PCI Error Recovery
pci_error_tolerance_time(5) - time interval, in minutes, between two PCI errors at a I/O slot that will result in automatic PCI Error Recovery
pfdat_hash_locks(5) - OBSOLETE kernel tunable parameter
physical_io_buffers(5) - total buffers for physical I/O operations
portal(5) - a "window to the future" for applications
privgrp(5) - HP-UX group privileges
privileges(5) - description of HP-UX privileges
process_id_max(5) - limit the maximum value for process IDs (PIDs)
process_id_min(5) - specify a minimum value for process IDs (PIDs)
pthread_scope_options(5) - list of external options to specify the scheduling contention scope of threads
pthread_stubs(5) - list of pthread calls for which the stubs are provided in the C library
Q
quota(5) - disk quotas
R
RBAC(5) - role-based access control — see rbac(5)
rbac(5) - role-based access control
rcsintro(5) - description of RCS commands
regexp(5) - regular expression and pattern matching notation definitions
region_hash_locks(5) - OBSOLETE kernel tunable parameter
remote_nfs_swap(5) - enable swapping across NFS
rtsched_numpri(5) - number of priority values to support for POSIX.1b realtime applications
S
sched_thread_affinity(5) - adjust scheduler thread affinity
scroll_lines(5) - number of scrollable lines used by the Internal Terminal Emulator
scsi_max_qdepth(5) - maximum number of I/Os that target will queue up for execution (OBSOLETE)
scsi_maxphys(5) - maximum allowed length of an I/O on all SCSI devices (OBSOLETE)
sd(5) - Software Distributor, commands to create, distribute, install, monitor, and manage software
secure_sid_scripts(5) - controls whether setuid and setgid bits on scripts are honored
sema(5) - enable or disable System V IPC semaphores at boot time
semaem(5) - adjust-on-exit maximum value
semmni(5) - number of System V IPC system-wide semaphore identifiers
semmns(5) - number of System V IPC system-wide semaphores
semmnu(5) - maximum number of System V IPC undo structures for processes
semmsl(5) - maximum number of System V IPC semaphores per identifier
semume(5) - maximum number of System V IPC undo entries per process
semvmx(5) - maximum value of any single System V IPC semaphore
sendfile_max(5) - maximum number of Buffer Cache Pages used by sendfile - OBSOLETED kernel tunable parameter
shmem(5) - enable or disable System V shared memory
shmmax(5) - maximum size (in bytes) for a System V shared memory segment
shmmni(5) - number of System V shared memory segment identifiers in the system
shmseg(5) - maximum number of System V shared memory segments per process
signal(5) - description of signals
signal.h(5) - description of signals — see signal(5)
sis(5) - secure internet services with Kerberos authentication and authorization
st_ats_enabled(5) - determines whether to reserve a tape device on open
standards(5) - UNIX standards behavior on HP-UX
stat(5) - data returned by the stat() function
stat.h(5) - data returned by the stat() function — see stat(5)
stdarg(5) - macros for handling variable argument lists
stdint(5) - integer types
stdsyms(5) - description of named defines and other specifications for namespace from HP-UX header files
STRCTLSZ(5) - maximum size of streams message control (bytes)
streampipes(5) - force all pipes to be STREAMS-based
STRMSGSZ(5) - maximum size of streams message data (bytes)
suffix(5) - file name suffix conventions
swapmem_on(5) - OBSOLETE kernel tunable parameter
swchunk(5) - swap chunk size in 1 KB blocks
sys_attrs_kevm(5) - KEVM (Kernel Event Manager) subsystem attributes
sysv_hash_locks(5) - System V IPC hashed spinlock pool size
T
tcphashsz(5) - determines the size of the networking hash tables
term(5) - terminal capabilities
thread_safety(5) - list of libc, libpthread and libgen interfaces that are: Not Thread-Safe, Cancellation Points, Cancel Safe, Async Signal Safe, or Async Cancel Safe
timeslice(5) - scheduling interval in clock ticks per second
timezone(5) - difference between Universal (Greenwich mean) time and Local time
types(5) - primitive system data types
U
uname_eoverflow(5) - causes uname() system function to return [EOVERFLOW] if values do not fit in fields
unctrl(5) - definitions for unctrl
unistd(5) - standard structures and symbolic constants
unistd.h(5) - standard structures and symbolic constants — see unistd(5)
unlockable_mem(5) - OBSOLETE kernel tunable parameter
unwind(5) - overview of stack unwind library entry points and convenience macros
unwind.h(5) - overview of stack unwind library entry points and convenience macros — see unwind(5)
V
values(5) - machine-dependent values
varargs(5) - handle variable argument list
vps_ceiling(5) - maximum (in kilobytes) of system-selectable page size
vps_chatr_ceiling(5) - maximum (in kilobytes) of user selectable page size
vps_pagesize(5) - minimum (in kilobytes) of system-selected page size
X
xferlog(5) - FTP server logfile
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.