W

Table of Contents

wadd_wch(3X) - add a complex character and rendition to a window — see add_wch(3X)

wadd_wchnstr(3X) - add an array of complex characters and renditions to a window — see add_wchnstr(3X)

wadd_wchstr(3X) - add an array of complex characters and renditions to a window — see add_wchnstr(3X)

waddch(3X) - add a single-byte character and rendition to a window and advance the cursor — see addch(3X)

waddchnstr(3X) - add length limited string of single-byte characters and renditions to a window — see addchnstr(3X)

waddchstr(3X) - add string of single-byte characters and renditions to a window — see addchstr(3X)

waddnstr(3X) - add a string of multi-byte characters without rendition to a window and advance cursor — see addnstr(3X)

waddnwstr(3X) - add a wide-character string to a window and advance the cursor — see addnwstr(3X)

waddstr(3X) - add a string of multi-byte characters without rendition to a window and advance cursor — see addnstr(3X)

waddwstr(3X) - add a wide-character string to a window and advance the cursor — see addnwstr(3X)

wattr_get(3X) - window attribute control functions — see attr_get(3X)

wattr_off(3X) - window attribute control functions — see attr_get(3X)

wattr_on(3X) - window attribute control functions — see attr_get(3X)

wattr_set(3X) - window attribute control functions — see attr_get(3X)

wattroff(3X) - restricted window attribute control functions — see attroff(3X)

wattron(3X) - restricted window attribute control functions — see attroff(3X)

wattrset(3X) - restricted window attribute control functions — see attroff(3X)

wbkgd(3X) - set or get background character and rendition using a single-byte character — see bkgd(3X)

wbkgdset(3X) - set or get background character and rendition using a single-byte character — see bkgd(3X)

wbkgrnd(3X) - set or get background character and rendition using a complex character — see bkgrnd(3X)

wbkgrndset(3X) - set or get background character and rendition using a complex character — see bkgrnd(3X)

wborder(3X) - draw borders from single-byte characters and renditions — see border(3X)

wborder_set(3X) - draw borders from complex characters and renditions — see border_set(3X)

wchgat(3X) - change renditions of characters in a window — see chgat(3X)

wclear(3X) - clear a window — see clear(3X)

wclrtobot(3X) - clear from cursor to end of window — see clrtobot(3X)

wclrtoeol(3X) - clear from cursor to end of line — see clrtoeol(3X)

wcolor_set(3X) - window attribute control functions — see attr_get(3X)

wconv(3C) - translate wide characters

wcrtomb(3C) - convert a wide-character code to a character (restartable)

wcscat(3C) - wide character string operations — see wcstring(3C)

wcschr(3C) - wide character string operations — see wcstring(3C)

wcscmp(3C) - wide character string operations — see wcstring(3C)

wcscoll(3C) - wide character string operations — see wcstring(3C)

wcscpy(3C) - wide character string operations — see wcstring(3C)

wcscspn(3C) - wide character string operations — see wcstring(3C)

wcsftime(3C) - convert date and time to wide-character string

wcslen(3C) - wide character string operations — see wcstring(3C)

wcsncat(3C) - wide character string operations — see wcstring(3C)

wcsncmp(3C) - wide character string operations — see wcstring(3C)

wcsncpy(3C) - wide character string operations — see wcstring(3C)

wcspbrk(3C) - wide character string operations — see wcstring(3C)

wcsrchr(3C) - wide character string operations — see wcstring(3C)

wcsrtombs(3C) - convert a wide-character string to a character string (restartable)

wcsspn(3C) - wide character string operations — see wcstring(3C)

wcsstr(3C) - wide character string operations — see wcstring(3C)

wcstod(3C) - convert a wide character string to a double-precision number

wcstof(3C) - convert a wide character string to a double-precision number — see wcstod(3C)

wcstoimax(3C) - convert wide character string to long integer

wcstok(3C) - wide character string operations — see wcstring(3C)

wcstol(3C) - convert wide character string to long integer

wcstold(3C) - convert a wide character string to a double-precision number — see wcstod(3C)

wcstoll(3C) - convert wide character string to long integer — see wcstol(3C)

wcstombs(3C) - multibyte characters and strings conversions — see multibyte(3C)

wcstoul(3C) - convert wide character string to long integer — see wcstol(3C)

wcstoull(3C) - convert wide character string to long integer — see wcstol(3C)

wcstoumax(3C) - convert wide character string to long integer — see wcstoimax(3C)

wcstring(3C) - wide character string operations

wcswcs(3C) - wide character string operations — see wcstring(3C)

wcswidth(3C) - wide character string operations — see wcstring(3C)

wcsxfrm(3C) - wide character string operations — see wcstring(3C)

wctob(3C) - conversion between single-byte and wide character — see btowc(3C)

wctomb(3C) - multibyte characters and strings conversions — see multibyte(3C)

wctrans(3C) - character transliteration — see towctrans(3C)

wctype(3C) - classify wide characters

wcursyncup(3X) - synchronize a window with its parents or children — see syncok(3X)

wcwidth(3C) - wide character string operations — see wcstring(3C)

wdelch(3X) - delete a character from a window. — see delch(3X)

wdeleteln(3X) - delete lines in a window — see deleteln(3X)

wecho_wchar(3X) - write a complex character and immediately refresh the window — see echo_wchar(3X)

wechochar(3X) - echo single-byte character and rendition to a window and refresh — see echochar(3X)

werase(3X) - clear a window — see clear(3X)

wget_wch(3X) - get a wide character from a terminal — see get_wch(3X)

wget_wstr(3X) - get an array of wide characters and function key codes from a terminal — see getn_wstr(3X)

wgetbkgrnd(3X) - set or get background character and rendition using a complex character — see bkgrnd(3X)

wgetch(3X) - get a single-byte character from the terminal — see getch(3X)

wgetn_wstr(3X) - get an array of wide characters and function key codes from a terminal — see getn_wstr(3X)

wgetnstr(3X) - get a multi-byte character length limited string from the terminal — see getnstr(3X)

wgetstr(3X) - get a multi-byte character string from the terminal — see getstr(3X)

whline(3X) - draw lines from single-byte characters and renditions — see hline(3X)

whline_set(3X) - draw lines from complex characters and renditions — see hline_set(3X)

win_wch(3X) - input a complex character and rendition from a window — see in_wch(3X)

win_wchnstr(3X) - input an array of complex characters and renditions from a window — see in_wchnstr(3X)

win_wchstr(3X) - input an array of complex characters and renditions from a window — see in_wchnstr(3X)

winch(3X) - input a single-byte character and rendition from a window — see inch(3X)

winchnstr(3X) - input an array of single-byte characters and renditions from a window — see inchnstr(3X)

winchstr(3X) - input an array of single-byte characters and renditions from a window — see inchnstr(3X)

winnstr(3X) - input a multi-byte character string from a window — see innstr(3X)

winnwstr(3X) - input a string of wide characters from a window — see innwstr(3X)

wins_nwstr(3X) - insert a wide-character string into a window — see ins_nwstr(3X)

wins_wch(3X) - insert a complex character and rendition into a window — see ins_wch(3X)

wins_wstr(3X) - insert a wide-character string into a window — see ins_nwstr(3X)

winsch(3X) - insert a single-byte character and rendition into a window — see insch(3X)

winsdelln(3X) - delete or insert lines into a window — see insdelln(3X)

winsertln(3X) - insert lines into a window — see insertln(3X)

winsnstr(3X) - insert a multi-byte character string into a window — see insnstr(3X)

winsstr(3X) - insert a multi-byte character string into a window — see insnstr(3X)

winstr(3X) - input a multi-byte character string from a window — see innstr(3X)

winwstr(3X) - input a string of wide characters from a window — see innwstr(3X)

wmemchr(3C) - memory operations based on wide-character — see wmemory(3C)

wmemcmp(3C) - memory operations based on wide-character — see wmemory(3C)

wmemcpy(3C) - memory operations based on wide-character — see wmemory(3C)

wmemmove(3C) - memory operations based on wide-character — see wmemory(3C)

wmemory(3C) - memory operations based on wide-character

wmemset(3C) - memory operations based on wide-character — see wmemory(3C)

wmove(3X) - window cursor location functions — see move(3X)

wnoutrefresh(3X) - refresh windows and lines — see doupdate(3X)

wordexp(3C) - perform word expansions

wordfree(3C) - perform word expansions — see wordexp(3C)

wprintf(3C) - print formatted wide-character output — see fwprintf(3C)

wprintw(3X) - print formatted output in window — see mvprintw(3X)

wredrawln(3X) - line update status functions — see redrawwin(3X)

wrefresh(3X) - refresh windows and lines — see doupdate(3X)

wscanf(3C) - convert formatted wide-character input — see fwscanf(3C)

wscanw(3X) - convert formatted input from a window — see mvscanw(3X)

wscrl(3X) - enhanced scroll a Curses window functions — see scrl(3X)

wsetscrreg(3X) - terminal output control functions — see clearok(3X)

wstandend(3X) - set and clear window attributes — see standend(3X)

wstandout(3X) - set and clear window attributes — see standend(3X)

wsyncdown(3X) - synchronize a window with its parents or children — see syncok(3X)

wsyncup(3X) - synchronize a window with its parents or children — see syncok(3X)

wtimeout(3X) - control blocking on input — see notimeout(3X)

wtouchln(3X) - window refresh control functions — see is_linetouched(3X)

wunctrl(3X) - generate printable representation of a wide character

wvline(3X) - draw lines from single-byte characters and renditions — see hline(3X)

wvline_set(3X) - draw lines from complex characters and renditions — see hline_set(3X)