Bundle Names

You can install vPars on an existing HP-UX installation directly from a depot, DVD, or by using an Ignite-UX server.

vPars Product Bundles

The vPars bundle names are:

Bundle Name	Description
T1335CC	vPars A.05.xx for HP-UX 11i v3
T1335BC	vPars A.04.xx for HP-UX 11i v2
Feature11i	(HP-UX 11i v2 only) Required vPars enablement patches for vPars A.04.xx. This bundle can be obtained from the HP-UX Update OE DVD. When the Feature11i and vPars product bundles are in the same depot, this bundle should be automatically selected when the vPars bundle is selected. For a complete list of required patches, see the HP-UX Virtual Partitions Release Notes.
T1335AC	vPars A.03.xx for HP-UX 11i v1




	CAUTION: Mixing vPars versions within the same nPartition Mixing different vPars versions within the same nPartition is only supported when using the following vPars releases: vPars A.05.01 or later with vPars A.04.02 or later. See “Mixed HP-UX 11i v2/v3 vPars Environments in vPars A.05.xx”. vPars A.04.05 or later with vPars A.03.05 or later. See “Mixed HP-UX 11i v1/v2 vPars Environments in vPars A.04.05”. vPars A.05.03 or later with vPars A.04.02 or later and vPars A.03.05 or later. See “Mixed HP-UX 11i v1/v2/v3 vPars Environments in vPars A.05.03”. Other than these supported mixed vPars releases, for vPars A.04.xx and A.03.xx, within a vPars environment, all OSs and vPars version must be the same. In other words, vpar1, vpar2, ... vparN must all be running the same OS and vPars software.




	NOTE: For information on versions, including vPars version, OS versions, and other product versions required to run with vPars, see the document HP-UX Virtual Partitions Ordering and Configuration Guide available at: http://docs.hp.com/en/vse.html#Virtual%20Partitions

vPars-related Bundles (A.03.xx and earlier)

Products related to this release of vPars are:

Bundle Name	Description
B6826AA	Partition Manager for nPartitions (parmgr) (Required for vPars A.03.xx and earlier)
VPARMGR	vPars GUI (vparmgr) for vPars A.03.xx and earlier (Optional)

Installing and Removing vPars-related Bundles

B6826AA (parmgr)

The Partition Manager (parmgr) is required for installation of the vPars A.03.xx and earlier. This is true on both nPartitionable servers as well as non-nPartitionable servers (rp7400/N4000 and rp5470/L3000). It is normal to have this product installed on non-nPartitionable servers.

The Partition Manager (PARMGR) is available at the HP Software Depot website:http://www.hp.com/go/softwaredepot

To install the Partition Manager bundle using the vPars CD:

# swinstall -s /cdrom B6826AA

To remove the Partition Manager product:

# /usr/sbin/swremove PartitionManager

Note that the Partition Manager product can be removed only after the vPars product is removed from a virtual partition.

VPARMGR

(vPars A.03.xx and earlier) The vPars GUI (vparmgr) is not automatically installed when vPars is installed. If you wish to use vparmgr, you need to manually select this bundle during your Software Distributor (SD) or Ignite-UX session or add this bundle to your swinstall command line.

VPARMGR is available on the vPars CD and from the HP Software Depot website: http://www.hp.com/go/softwaredepot

To install the VPARMGR bundle using the vPars CD:

# swinstall -s /cdrom VPARMGR

To remove the VPARMGR product:

# /usr/sbin/swremove vParManager




	NOTE: The product VPARMGR is optional.

Installing vPars and the vPars-related Bundles from CD

Below is an example of using the swinstall command line to install vPars from the CD:

# swinstall -s /cdrom -x autoreboot=true T1335AC

To install vPars and the vPars-related bundles:

# swinstall -s /cdrom -x autoreboot=true T1335AC VPARMGR B6826AA

Bundle Names

Technical documentation

» Table of Contents

» Glossary