home | O'Reilly's CD bookshelfs | FreeBSD | Linux | Cisco | Cisco Exam  


Book HomeLinux in a NutshellSearch this book

2.3. Overview of TCP/IP

TCP/IP is a set of communications protocols that define how different types of computers talk to one another. It's named for its two most common protocols, the Transmission Control Protocol and the Internet Protocol. The Internet Protocol moves data between hosts: it splits data into packets, which are then forwarded to machines via the network. The Transmission Control Protocol ensures that the packets in a message are reassembled in the correct order at their final destination and that any missing datagrams are resent until they are correctly received. Other protocols provided as part of TCP/IP include:

Address Resolution Protocol (ARP)

Translates between Internet and local hardware addresses (Ethernet et al.)

Internet Control Message Protocol (ICMP)

Error-message and control protocol

Point-to-Point Protocol (PPP)

Enables TCP/IP (and other protocols) to be carried across both synchronous and asynchronous point-to-point serial links

Reverse Address Resolution Protocol (RARP)

Translates between local hardware and Internet addresses (opposite of ARP)

Serial Line Internet Protocol (SLIP)

Carries IP over serial lines

Simple Mail Transport Protocol (SMTP)

Used by sendmail to send mail via TCP/IP

Simple Network Management Protocol (SNMP)

Performs distributed network management functions via TCP/IP

User Datagram Protocol (UDP)

Provides data transfer, without the reliable delivery capabilities of TCP

Background about TCP/IP is described in the three-volume set Internetworking with TCP/IP by Douglas R. Comer, published by Prentice-Hall. The commands in this chapter and the next are described in more detail in TCP/IP Network Administration, 2d ed., by Craig Hunt and Linux Network Administrator's Guide by Olaf Kirch and Terry Dawson, both published by O'Reilly & Associates.

In the architecture of TCP/IP protocols, data is passed down the stack (toward the Network Access Layer) when it is being sent to the network and up the stack when it is being received from the network (see Figure 2-1).

Figure 2-1

Figure 2-1. Layers in the TCP/IP protocol architecture

2.3.1. IP Addresses

The IP (Internet) address is a 32-bit binary number that differentiates your machine from all others on the network. Each machine must have a unique IP address. An IP address contains two parts: a network part and a host part. The number of address bits used to identify the network and host differ according to the class of the address. There are three main address classes: A, B, and C (see Figure 2-2). The leftmost bits indicate what class each address is.

Figure 2-2

Figure 2-2. IP address structure

A more recent standard called Classless Inter-Domain Routing (CIDR) extends the class system's idea of using initial bits to identify where packets should be routed. Under CIDR, a new domain can be created with any number of fixed leftmost bits (not just a multiple of 8).

Another new standard called IPv6 changes the method of addressing and increases the number of fields, but it will be a while before anyone uses it.

If you wish to connect to the Internet, contact the Network Information Center and have them assign you a network address. If you are not connecting to an outside network, you can choose your own network address, as long as it conforms to the IP address syntax. You should use special reserved addresses provided for in RFC 1597, which lists IP network numbers for private networks that don't have to be registered with the IANA (Internet Assigned Numbers Authority). An IP address is different from an Ethernet address, which is assigned by the manufacturer of the physical Ethernet card.

2.3.2. Gateways and Routing

Gateways are hosts responsible for exchanging routing information and forwarding data from one network to another. Each portion of a network that is under a separate local administration is called an autonomous system (AS). Autonomous systems connect to each other via exterior gateways. An AS also may contain its own system of networks, linked via interior gateways.

2.3.2.3. Routing tables

Routing tables provide information needed to route packets to their destinations. This information includes destination network, gateway to use, route status, and number of packets transmitted. Routing tables can be displayed with the netstat command.

2.3.3. Name Service

Each host on a network has a name that points to information about the host. Hostnames can be assigned to any device that has an IP address. Name service translates the hostnames (easy for people to remember) to IP addresses (the numbers the computer deals with).

2.3.4. Configuring TCP/IP

2.3.4.2. Serial-line communication

There are two protocols for serial-line communication: Serial Line IP (SLIP) and Point-to-Point Protocol (PPP). These protocols let computers transfer information using the serial port instead of a network card and a serial cable in place of an Ethernet cable.

Under Linux, the SLIP driver is installed in the kernel. To convert a serial line to SLIP mode, use the slattach program (details on slattach are available in Chapter 3, "Linux Commands"). Don't forget that after putting the line in SLIP mode, you still have to run ifconfig to configure the network interface. For example, if your machine is named tanuki and you have dialed in to ruby:

   # ifconfig s10 tanuki pointopoint ruby
   # route add ruby
   # route add default gw ruby

This configures the interface as a point-to-point link to ruby, adds the route to ruby, and makes it a default route, specifying ruby as the gateway.

PPP was intended to remedy some of SLIP's failings; it can hold packets from non-Internet protocols, it implements client authorization and error detection/correction, and it dynamically configures each network protocol that passes through it. Under Linux, PPP exists as a driver in the kernel and as the daemon pppd. For more information on pppd, see Chapter 3, "Linux Commands".

2.3.5. Troubleshooting TCP/IP

The following commands can be used to troubleshoot TCP/IP. For more details on these commands, see Chapter 3, "Linux Commands".

ifconfig

Provide information about the basic configuration of the network interface.

netstat

Display network status.

ping

Indicate whether a remote host can be reached.

nslookup

Query the DNS name service.

traceroute

Trace route taken by packets to reach network host.



Library Navigation Links

Copyright © 2001 O'Reilly & Associates. All rights reserved.