Symbols | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Index: R
- R command (sendmail): 10.6. Rewriting the Mail Address
- r commands (Unix)
- R flag (Linux routing table): 2.4. The Routing Table
- RADB (Routing Arbiter Database): 2.3. Internet Routing Architecture
- range parameter (dhcpd): 9.5.1. dhcpd.conf
- RARP (Reverse Address Resolution Protocol): 3.6.1. Reverse Address Resolution Protocol
- RAs (Routing Arbiters): 2.3. Internet Routing Architecture
- raw field (inet.conf file): 5.3. The Internet Daemon
- rc.local script
- rc.sysinit script, Linux: 5.2.1.1. Understanding /etc/inittab
- rdist command: 9.6.2. rdist
- re-transmission: 1.6.2. Transmission Control Protocol
- reachability information
- read access (filesystems): 9.1.2.1. The share command
- ReadmeName directive (Apache): 11.3.5. Creating a Fancy Index
- receive option (pppd): A.2. The PPP Daemon
- Recipient field (sendmail): 10.5.8. Defining Mailers
- recommended protocols: 1.1.2. Protocol Standards
- reconfigure file (Solaris): 5.1.1. Using Dynamically Loadable Modules
- record option (pppd): A.2. The PPP Daemon
- RECORD option (xinetd): 12.5.2. Controlling Access with xinetd
- recursion option (named): C.2.5. The options Statement
- recursive-clients (named): C.2.5.1. The BIND 9 options statement
- recursive searches (DNS): 3.3.2. Creating Domains and Subdomains
- recursive servers (DNS): 3.3.2. Creating Domains and Subdomains
- recv (gated): B.4. Trace Statements
- recvbuffer parameter (gated): B.8.4. The bgp Statement
- Red Hat Linux
- caching-only servers, configuring: 8.3.1.1. A caching-only server configuration
- DSO modules: 11.3.1. Loading Dynamic Shared Objects
- Ethernet device drivers: 5.1.1. Using Dynamically Loadable Modules
- httpd.conf file, location: 11.2. Configuring the Apache Server
- named command, running: 8.3.8. Controlling the named Process
- NIS domains: 9.4. Network Information Service
- printcap configuration tool: 9.2.1.1. The printcap file
- sendmail, startup script: 10.2. Running sendmail as a Daemon
- updating: 12.3.2. Keep Software Updated
- Redirect Message (ICMP): 1.5.2. Internet Control Message Protocol
- redirect parameter (gated): B.8.8. The icmp Statement
- redirect statement (gated): B.8.7. The redirect Statement
- redirection, routing: 7.3.1. Adding Static Routes
- Ref field (Linux routing table): 2.4. The Routing Table
- refuse-chap option (pppd): A.2. The PPP Daemon
- refuse-pap option (pppd): A.2. The PPP Daemon
- regex (sendmail K command value): E.4.5. The sendmail K Command
- Regional Internet Registries (IRs), address requests: 4.2.1.1. Obtaining an official network address
- registered hosts: 3.2. The Host Table
- registries, addresses, obtaining from: 4.2.1.1. Obtaining an official network address
- reject (gated): B.6. Interface Statements
- reject parameter (gated): B.9. static Statements
- relay mailer: 10.4.1.1. Building a sendmail.cf with m4 macros
- RELAY_DOMAIN (sendmail macro): E.3. m4 sendmail Macros
- RELAY_DOMAIN_FILE (sendmail macro): E.3. m4 sendmail Macros
- reliability
- remnantholdtime parameter (gated): B.8.10. The kernel Statement
- remnants parameter (gated): B.8.10. The kernel Statement
- Remote File Distribution Program: 9.6.2. rdist
- Remote Procedure Calls (see RPCs)
- remotename option (pppd): A.2. The PPP Daemon
- replace (gated): B.4. Trace Statements
- REPORT keyword (chat): A.3. chat
- request parameter (gated): B.8.10. The kernel Statement
- Requests for Comments (see RFCs)
- require-chap option (pppd): A.2. The PPP Daemon
- Require directive (Apache): 11.4.4.1. Requiring user authentication
- require-pap option (pppd): A.2. The PPP Daemon
- required protocols: 1.1.2. Protocol Standards
- Reseaux IP Europeens (see RIPE)
- reserved addresses: 2.2. The IP Address
- reset command (dip): 6.3.2. Dial-Up PPP
- resolv.conf file: 8.1.1. BIND Configurations
- resolver code: 3.3.4. BIND, Resolvers, and named
- resolver-only configurations: 3.3.4. BIND, Resolvers, and named
- resolver software (name service): 3.3.4. BIND, Resolvers, and named
- resolvers: 8.1.1. BIND Configurations
- resource records: C.3.1. Standard Resource Records
- resources, security: 12.8. Words to the Wise
- Responsible Person (RP) records: C.3.1.7. Responsible Person record
- restrict parameter (gated): B.11. Aggregate Statements
- retain parameter (gated): B.9. static Statements
- RETR command (POP): 3.4.2. Post Office Protocol
- retrans= option (vfstab file): 9.1.3.2. The vfstab and fstab files
- retry= option (vfstab file): 9.1.3.2. The vfstab and fstab files
- RETURN keyword (iptables command): 12.7.2.1. Defining iptables filter rules
- Reverse Address Resolution Protocol (RARP): 3.6.1. Reverse Address Resolution Protocol
- reverse domains: 4.2.1.2. Obtaining an IN-ADDR.ARPA domain
- reverse-mapping zone file: 8.3. Configuring named
- reverse zone file: 8.3.6. The Reverse Zone File
- rewrite rules (sendmail): 10.6. Rewriting the Mail Address
- Rewriting Rules (generic-linux.cf section): 10.4.2. General sendmail.cf Structure
- RFC 1918: 4.2.1. Obtaining an IP Address
- rfc822 (MIME data subtype): 3.4.4. Multipurpose Internet Mail Extensions
- rfc2308-type1 option (named): C.2.5. The options Statement
- RFCs (Requests for Comments)
- rhosts file, security considerations: 12.2.5. Secure the r Commands
- ribs unicast parameter (gated): B.8.3. The isis Statement
- richtext text (MIME data subtype): 3.4.4. Multipurpose Internet Mail Extensions
- RIP-2: 7.4.2. RIP Version 2
- RIP (Routing Information Protocol): 2.4. The Routing Table
- rip statement (gated): B.8.2. The rip Statement
- RIPE-181 standard: 2.3. Internet Routing Architecture
- RIPE Network Control Center: 2.3. Internet Routing Architecture
- RIPE (Reseaux IP Europeens): 2.3. Internet Routing Architecture
- rmmod command (Linux): 5.1.1. Using Dynamically Loadable Modules
- ro option
- root access
- root domain (DNS): 3.3.1. The Domain Hierarchy
- root hints file: 8.3. Configuring named
- root servers
- root_squash setting (exports file): 9.1.2.2. The /etc/exports file
- rotate option (resolv.conf file): 8.2.1. The Resolver Configuration File
- route command: 7.3. Building a Static Routing Table
- route filters: 7.7.1.3. Exterior gateway configuration
- route (gated): B.4. Trace Statements
- routed command: 7.4.1. Routing Information Protocol
- routerdiscovery parameter (gated): B.8.8. The icmp Statement
- routerid (gated): B.7. Definition Statements
- routers
- routes parameter (gated): B.8.10. The kernel Statement
- routing: 7.1. Common Routing Configurations
- 7.6.1. gated's Preference Value
- bilateral agreements: 2.3. Internet Routing Architecture
- classful: 7.4.1.1. Running RIP with routed
- common configurations: 7.1. Common Routing Configurations
- consolidated: 2.2.4. CIDR Blocks and Route Aggregation
- data delivery: 2.1. Addressing, Routing, and Multiplexing
- databases, registering: 4.3.2. Registering in a Routing Database
- datagrams: 1.5.1.2. Routing datagrams
- distance-vector algorithms: 7.4. Interior Routing Protocols
- domains: 2.3. Internet Routing Architecture
- filters, gated and: B.10. Control Statements
- gated: 7.6. Gateway Routing Daemon
- Internet architecture: 2.3. Internet Routing Architecture
- planning: 4.3. Planning Routing
- poison reverse: 7.4.1.1. Running RIP with routed
- policies, AS path: B.10. Control Statements
- protocols: 7.1. Common Routing Configurations
- BGP: 7.5.2. Border Gateway Protocol
- EGP: 7.5.1. Exterior Gateway Protocol
- exterior: 7.5. Exterior Routing Protocols
- interior: 7.4. Interior Routing Protocols
- OSPF: 7.4.3. Open Shortest Path First
- RIP: 7.4.1. Routing Information Protocol
- RIP-2: 7.4.2. RIP Version 2
- routed command: 7.4.1.1. Running RIP with routed
- selecting: 7.5.3. Choosing a Routing Protocol
- system configuration and: 4. Getting Started
- redirection: 7.3.1. Adding Static Routes
- slow convergence problem: 7.4.1.1. Running RIP with routed
- split horizon: 7.4.1.1. Running RIP with routed
- triggered updates: 7.4.1.1. Running RIP with routed
- troubleshooting: 13.5. Checking Routing
- Routing Arbiter Database (see RADB)
- Routing Arbiters (RAs): 2.3. Internet Routing Architecture
- Routing Information Protocol (see RIP)
- routing tables: 2.4. The Routing Table
- bit mask: 2.4. The Routing Table
- cache: 2.4. The Routing Table
- contents of: 7.2. The Minimal Routing Table
- default gateways: 2.4. The Routing Table
- deleting routes, RIP: 7.4.1. Routing Information Protocol
- destination values: 2.4. The Routing Table
- dynamic: 4.3. Planning Routing
- end-to-end routes: 2.4. The Routing Table
- informational fields: 2.4. The Routing Table
- Linux: 2.4. The Routing Table
- loopback route: 2.4. The Routing Table
- metric, changing with ifconfig command: 6.1.6.4. Metric
- ping command: 7.2. The Minimal Routing Table
- reducing size of: 2.2.4. CIDR Blocks and Route Aggregation
- routd command: 7.4.1. Routing Information Protocol
- Solaris: 2.4. The Routing Table
- static: 4.3. Planning Routing
- routing updates (RIP): 7.4.1. Routing Information Protocol
- RP (Responsible Person) records: C.3.1.7. Responsible Person record
- RPCs (Remote Procedure Calls), port numbers: 2.6.2. Port Numbers
- rquotad command: 9.1.1. NFS Daemons
- rrset-order option (named): C.2.5. The options Statement
- RS232C connectors: 1.2. A Data Communications Model
- rsize= option (vfstab file): 9.1.3.2. The vfstab and fstab files
- rulesets (sendmail): 10.6.3. The Set Ruleset Command
- runlevel field (inittab file): 5.2.1.1. Understanding /etc/inittab
- runlevels
- RUNNING flag (ifconfig command): 6.1.2. Checking the Interface with ifconfig
- rw option
Symbols | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Copyright © 2002 O'Reilly & Associates, Inc. All Rights Reserved.